MicroTrackRC by 3Drcnc
The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assemble and use very cheap readily available electronics but still be a very fun project to build and drive. I printed all the parts on two printers in just two days so if you don't want to print for weeks but still make a fun project combining 3d printing and RC this is perfect!
Watch my Youtube video about the project and the build: https://www.youtube.com/watch?v=0oohyrdZCt8
For more information on the hardware and electronics look at the "MicroTrackRC HardwareV2" included in the download. There are a few diffrent variats of some of the parts. These are organized in separate .zip files in the download. You need to print one of the variants from each .zip file. All other parts also need to be printed once except for the track sections that you need 44 of in total. Since there are a few different variants the hardware can also change so refrence the hardware list for what you need for your configuration. In the hardware list there's also listed what electronics you need and some examples of where you can order them.
The MicroTrackRC is designed to require as little support as possible. The only part requiring support is the cutouts for the track tensioning in the frame. PLA works great for all of the parts using 2-3 walls and 10-20% infill.
Happy printing!
MicroTrackRC by 3Drcnc
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by 3Drcnc Projects
-
V slot wheels (Easy printable)
Easy printeable v slot wheels you can use on your v slot printer. I'm using it on my diy 3d printer ...
-
Ender 3 Linear Rail Upgrade (No modifying of existing parts)
An linear rail upgrade for the ender 3 that was designed to require as little aditional hardware as ...
-
Ender 3 Linear Rail Upgrade. MGN15H
This is a remox of my own design that can be found right here: https://www.thingiverse.com/thing:427...
-
3D Printed Snow Tires For 1/10 Scale RC Car (12mm hex)
3D printable snow tires forany 1/10 scale car with 12mm hex on the wheel mounts. (and enoght clearan...
-
Buzz Wire Game enclosure for Futurekit FK145 soldering kit
A very simple easy to print case for the Futurekit buzz wire game (FK145). No support required. Othe...
-
MicroTrackRC by 3Drcnc
The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assem...
-
Skr V1.3 mount with two 40mm cooling fans
A mount for the Bigtreetech Skr V1.3 3D printer control board. I'll be using it in my DIY 3D printer...
-
DIY 3D Printed Camera Slider
This is a 3d printed camera slider that I've beeen working on for quite some time. As of now it's on...
-
Storage/Sorting Box for Nuts, Bolts and More! (600 000 combinations)
Hello!This is a modular box design I made as a second iteration to my previous storage box(linked fu...
-
Open RC F1 Snow Conversion
A really simple conversion for Daniel Noree's Open rc f1 car. It includes snow tires for the rear wh...
-
Soldering Fume Extractor for lipo battery or dc wall adapter
A really simple 3d printable soldering fume extractor that works suprisingly well.Video: https://www...
-
Open source 3D Printed RC Airboat (easy build)
This 100% 3D Printed Airboat is extremely simple to build and at the same time it might be the most ...
-
Open Source 3D Printed RC Snowmobile V2
The OP3DRCSnowmobile is a fully working 3D printed RC snowmobile!Watch it in action:https://www.yout...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
344 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
324 0 1 -
-
-
