This PCB is for my motion-controlled stairlight.

This PCB is desigend for up to 16 stair steps.

Motion detection based on PIR-Sensors.

This version is without fading. If you want your LEDs fade-in and out use this project:

https://www.pcbway.com/project/shareproject/LED_stairlight__with_fade__by_SmartHome_yourself.html

You can find an interactive BOM to see where any part has it's place here:

https://smarthomeyourself.de/Platine/treppe_ohne_fade/ibom.html

All needed Parts for PCB are documented here: (external Parts like Motion-Sensors and LED-Stripes are not included in this list)

https://smarthomeyourself.de/anleitung-zum-selber-bauen/unabhaengige-projekte/arduino-und-esp-projekte/treppen-lauflicht-mit-bewegungserkennung/bauteil-liste-fuer-platine-zur-treppenbeleuchtung-mit-fading/

The software for this project contains a lot of optional settings to configure the behaviour to your needs.

You can configure for example:

• set on/off the lightlevel-sensor to lightup only at night (when the room is dark)
• analog or digital sensors for activate/deactivate lights
• animation on/off
• speed of animation
• speed of light on and off
• timing of delays

You can download the sketch for Arduino here:

https://github.com/danielscheidler/SHYS-Treppenlauflicht-Ohne-LAN

In this video you can see the stairlight in action:

https://www.youtube.com/watch?v=VJfymwNkr7A&feature=youtu.be&t=396

https://youtu.be/A9EpBSxqn-o?t=130

Full documentation of this project (german) you can find at:

https://smarthomeyourself.de/treppe

https://smarthomeyourself.de/anleitung-zum-selber-bauen/unabhaengige-projekte/arduino-und-esp-projekte/treppen-lauflicht-mit-bewegungserkennung/bauteil-liste-fuer-platine-zur-treppenbeleuchtung-mit-fading/