Inline LED strobe PCB
This is a simple 555 Timer based LED strobe. The component values are designed to flash the strobe at a similar rate to a real alarm system strobe light.
Keeping this PCB very skinny allows it to fit inside some heat shrink and hide easily away. The LED can then be placed anywhere, or soldered directly onto the board if desired.
Component values are marked on the silkscreen so no component designators or lookup is required to find the right values.
Inline LED strobe PCB
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Steven George
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
161 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1020 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
584 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3051 2 3 -
RadioHAT - Raspberry Pi radio development platform
2602 0 4 -
-
-
