|
|
39SF010A |
x 1 | |
|
|
74HCT4040M96 |
x 2 | |
|
|
2N2002K |
x 1 | |
|
|
100K 0805 resistors |
x 2 | |
|
|
0.1uF 0805 capacitors |
x 4 | |
|
|
10K 0805 resistors (for red leds) |
x 12 | |
|
|
15K 0805 resistors (for green leds) |
x 12 | |
|
|
Red 0805 LEDs |
x 12 | |
|
|
Green 0805 LEDs |
x 12 |
GB 32KB XMAS Flash Cart
A Gameboy 32KB XMAS based flash cart. Uses a binary counter to animate the LEDs depending on the bridged pads.
Make sure to select 0.8mm thickness. Up to you if you want to go ENIG or HASL.
Bridge only one of the clock divider pads to control the speed and bridge only one of the clock selection pads (A15/RD/WR/CS/CLK).
GB 32KB XMAS Flash Cart
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by AlexiG
-
NDS Y10-01 Replacement PCB
This is a replacement NDS Y10-01 PCB. Useful if you have existing games that have damaged PCBs, simp...
-
Gameboy 32KB Flash Cart
A 32KB Flash cart for the Gameboy. Order as 0.8mm and ENIG surface finish
-
Gameboy Debug Cart
A simple Gameboy debug cart, order as 0.8mm
-
GBA Cart Extender for aPocket
This should allow you to extend your GBA games to be flush with the Analogue Pocket top. Useful for ...
-
GBA Cartridge Slot FFC Extender (End)
Just a simple board which allows you to extend your GBA’s cartridge slot to another PCB by using a 3...
-
GBA Cartridge Slot FFC Extender (Start)
Just a simple board which allows you to extend your GBA’s cartridge slot to another PCB by using a 3...
-
GB 32KB XMAS Flash Cart
A Gameboy 32KB XMAS based flash cart. Uses a binary counter to animate the LEDs depending on the bri...
-
Programmable Mist Maker - XIAO / QT PY Extension
1951 2 2 -
RadioHAT - Raspberry Pi radio development platform
1655 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3914 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4631 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5444 2 2 -
