ESP32-Minikit Base Board
Base Board for ESP32-MiniKit
Electrolytic capacitors and ceramic capacitors for 3V3 and 5V power lines can be mounted.(C1/C2/C3/C4)
The following JST XH connectors can be mounted.
1.SPI: 3V3/GND/MISO/MOSI/SS/SCK
2.I2C: 3V3/GND/SCL/SDA
3.JTAG: 3V3/GND/TMS/TCK/TDO/TDI
4.RESET: 3V3/GND/EN
5.IO1: 3V3/GND/IO16/IO17/IO33
6.IO2: 3V3/GND/IO25/IO27/IO32
7.DS18B20: 3V3/GND/IO26(Resistor can be mounted. (R1))
8.5V: 5V/GND
ESP32-Minikit Base Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Yukari Shoji
-
ESP32 DevKit-C Base Board
ESP32-DevKit-C Base BoardConnectersJ1: JTAG (3V3/GND/TMS/TCK/TDO/TDO)J2: I2C (GND/3V3/SCL/SDA)J3: I2...
-
ESP32 CPU board for ESP-PROG. Ver2.0
This CPU board is Ver.2 for use with ESP-PROG.Since the writing circuit of ESP-PROG is used, it is a...
-
ESP32 CPU board for ESP-PROG.
This CPU board is for use with ESP-PROG.Since the writing circuit of ESP-PROG is used, it is a simpl...
-
Corsair Lighting Protocol board
This board can be used to integrate custom/unofficial ARGB strips with iCUE. software from: https://...
-
ESP32-Minikit Base Board
Base Board for ESP32-MiniKitElectrolytic capacitors and ceramic capacitors for 3V3 and 5V power line...
-
Programmable Mist Maker - XIAO / QT PY Extension
1074 2 1 -
RadioHAT - Raspberry Pi radio development platform
891 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3334 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3944 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4332 2 2
