Aaron Williams
UNITED STATES OF AMERICA • + Follow
Components
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
ESP32-C3 BNO086 Slime-VR tracker
All design files are available at https://gitlab.com/aaron.w2/Slime_VR2
Now all I need is a 3-D printed enclosure. I also have the auxiliary board, however, I plan to build these by hand in-house.
Most if not all parts are available from Digikey.
Adjust the charging current by changing R20. This is a hand-solderable 0805 resistor.
Code
SlimeVR Project
https://github.com/SlimeVR
Schematic and Layout
Gitlab PCB source and schematic
https://gitlab.com/aaron.w2/Slime_VR2
Dec 06,2022
3,055 views
ESP32-C3 BNO086 Slime-VR tracker
4 Layers PCB 37 x 64 mm FR-4, 1.6 mm, 1, Immersion gold, Green Solder Mask, White silkscreen
This is a SlimeVR board based on the ESP32-C3 and a BNO086 motion controller chip and USB-C battery charging.
3055
2
0
Published: Dec 06,2022
Standard PCB
Download Gerber file 19
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA)
License.
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Aaron Williams
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
