|
KiCad 9.0 |
Crystal Tester
The Crystal Tester allows you to check any crystal for frequency accuracy. Connect your oscilloscope to the output pin and insert a crystal into the socket. Ensure one pin of the crystal is connected to the ground terminal, and the other to one of the positive pins. Your choice of pin will depend on the physical lead spread of the crystal.
VCC should be 5V to 12V. All the SMD components are size 1206 for easy soldering,
Crystal Tester
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by ZS6ZF ZS6ZF
-
Crystal Tester
The Crystal Tester allows you to check any crystal for frequency accuracy. Connect your oscilloscope...
-
Positive Voltage (with filter) converted for Negative and Positive Voltage, ideal for Amps and opAmps.
This board converts a single standard power supply voltage into stable positive and negative voltage...
-
Signal Function generator
This board functions as a signal generator, using a 4060 IC to produce various frequencies in both s...
-
Common Emitter Amplifier - 5V
The project aimed to design a simple BJT-based amplifier for audio or instrument signals. It is capa...
-
Programmable Mist Maker - XIAO / QT PY Extension
966 2 0 -
RadioHAT - Raspberry Pi radio development platform
783 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3237 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3863 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4227 2 2
