Continuity Tester RCA SNES PS1 AV Cable Tester
The goal is this can fit in a pocket, weigh less than 100grams. Regardless of where you are. At the bench, a flea market, or used store. You want to be able to verify if a AV cable works. This version will focus on RCA Phono cables, Nintendo SNES N64 NGC and PlayStation PS1 PS2 PS3 AV Cables.
Additional information is here on GitHub.
Thanks
Continuity Tester RCA SNES PS1 AV Cable Tester
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Aaron Gates
-
Continuity Tester RCA SNES PS1 AV Cable Tester
The goal is this can fit in a pocket, weigh less than 100grams. Regardless of where you are. At the ...
-
Famicom to NES Adapter
Famicom to NES Adapter will fit inside a NES cartridge shell. However, due to it's size you will may...
-
Snes LoRom NoSave 27c160 (HiRom moddable/Solder pads and 1 trace cut)
In 2017, The original intent was for a economical Super Nintendo Snes HiRom and LoRom board that wou...
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
669 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
379 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2820 2 3 -
RadioHAT - Raspberry Pi radio development platform
2419 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4505 0 6
