Top
Arduino acceleration logger
### DESCRIPTION
Currently, this design has some faults!
the 3k6Ohm resistor should be a 2k4Ohm in stead. The 5V regulator pinout is wrong compared to the footprint shown on the board. The Arduino MKRZERO footprint is 2.54mm too wide.
### TECHNICAL DETAILS / COMPONENTS
### LEARN / TOPIC / BUILD INSTRUCTIONS
Arduino acceleration logger
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Kristoffer Sl?ttsveen
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
191 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1064 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
613 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3076 2 3 -
RadioHAT - Raspberry Pi radio development platform
2626 0 4 -
-
