Top Solder Mask
Top Overlay
Top Paste Mask
Top Copper Layer
Bottom Solder Mask
Bottom Overlay
Bottom Copper Layer
Keep Out Layer
Bottom
ARDUINO Kart Data Logger
### DESCRIPTION
Log data from your Kart to a bluetooth device using a few sensors.
### TECHNICAL DETAILS / COMPONENTS
You will need: An Arduino Nano (or another Arduino board), 4 Hall effect switches, 3 Linear hall sensors, one bluetooth HC-05 module, 5 resistors 2.2k Ohm, and 1 resistor 1k Ohm.
As it is now, the bluetooth module sends data to a RacaChrono app on your mobile device.
You can modify the code to send data to another aplication.
### LEARN / TOPIC / BUILD INSTRUCTIONS
Connect all the sonsors with the corect polarity to the correct place on the PCB. Use the code in the GitHub link.
Thank you.
ARDUINO Kart Data Logger
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Pintea Mihaita
-
TvG KDL v4.0
TvG Kart Data Logger v4.0Here is a video showing some of the functionality of my project. https://ww...
-
Breakout Board for up to 28 parts
18 February 2020 EDIT: I just corrected a small mistake on the NRF24L01 part. Some small traces were...
-
TvG Kart DataLogger v3.0
TvG Kart Data Logger v3.0With my project I aim to build a cheap data logger for Karts. (2 stroke, 4 ...
-
TvG Kart Data Logger v2.2
TvG Kart Data Logger (v2.1 on the cheap)My project aims to build a relatively cheap data logger for ...
-
Arduino Kart Data Logger v2.0
### DESCRIPTIONLog data from your Kart to a Bluetooth device using a few sensors. In the current c...
-
ARDUINO Kart Data Logger
### DESCRIPTIONLog data from your Kart to a bluetooth device using a few sensors.### TECHNICAL DETAI...
-
Programmable Mist Maker - XIAO / QT PY Extension
1066 2 1 -
RadioHAT - Raspberry Pi radio development platform
877 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3330 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3938 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4326 2 2
