2BitWizard GameBoy Camera compact PCB (Long Neck)
A smaller flashable version of the original GameBoy Camera
This project may still receive updates. The current release (1.5) has been produced, assembled and tested. While earlier prototypes and this 1.5 release have all worked for me, I can't guarantee their functionality. Assemble and use at your own risk. It is extremely easy to damage the MAC-GBD, FRAM and flash chip during assembly.
Note on assembly of the board. If you're using a new 3V0 regulator from the BOM list, the C16 capacitor will not be necessary. Unlike the original 3V0 regulator, the pin connected to this capacitor is NC on the new 3V0 regulator.
IMPORTANT note: Some GameBoy cameras have the U4 regulator populated instead of the U5 regulator. My board is designed to work with either the regulator linked in the BOM (recommended) or the U5 regulator harvested from the original camera cart. U4 will not work.
For more information regarding PCB specifications, please see:
2BitWizard GameBoy Camera compact PCB (Long Neck)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by 2BitWizard
-
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
237 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
432 0 2 -
-
📦 StackBox: Modular MDF Storage Solution 📦
267 0 2 -
-