Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
I designed this PCB based on the TSL2591 light meter chip. The purpose of the circuit is to measure light and suggest an exposure value. So, people who want to shoot photos with analog cameras without...
This is the v1.1 of my breadboard PSU PCB. The board is designed to provide power for breadboard using the USB PD protocol. The board is able to negotiate a wide range of voltage (and current) from a ...
I designed this PCB to build a miniature voltmeter specifically designed for breadboards. The PCB is rather simple, but still, all the criteria were fulfilled. Dimensions are tightly matching the draw...
Everything went well and quickly with the order. The manufacturing went quickly despite the fact that I selected some extra features such as a black solder mask, ENIG surface finish, and I put the tin...
This PCB is used as the front panel of the enclosure I use for my ADS1256-RP2040 DAQ. It meets all requirements. The dimensional tolerances are good which is very important to me in this case due to t...
This is the first time I ordered flex PCB. I designed it from scratch, so I was a bit worried if it would be good, but it turned out to be perfect. I use it as a flexible connection between two PCBs. ...
I revised my similar design from 2 years ago and made this board. I made a few improvements that made the board more up-to-date and easier to manufacture. I chose a purple color for the PCB because th...
I primarily designed this PCB to replace the original controller of my FPV camera. But in fact, it can be used with any microcontroller and it can be made into a nice little navigator joystick. The ci...
I designed this miniature PCB to allow mounting and placing the TCD1304 linear CCD independently from its driver microcontroller. The board is designed to be produced in matte black colour to minimise...
I redesigned my earlier board with some improvements and updates, and got it manufactured again. The matte black PCB turned out great, which is particularly important for this design as it is incorpor...
I designed this board because it does not exist on the market yet. It is a smart breadboard that can communicate with modern USB PD chargers and negotiate voltages up to 20 V. This 20 V is available o...
My latest iteration of the "ADS1256-RP2040 GPIO" PCB. It came out great. The white text on the vivid red PCB is very easy to read. The traces came out perfectly, and all the other board specs turned o...
I wanted to try my design in matte black color to see how it resonates with my customers. They liked it! And of course, I liked it too. I made very nice, curved traces for this board, however, unfortu...
This is my latest design for the ADS1256-based DAQ board. The board has tiny, curved traces, plenty of vias, a lot of silkscreen text and other stuff that could be challenging for production. But, as ...
1 2 3 4 5 6