Rahman Shaber
NORWAY • + Follow
Edit Project
Description
mutantC_v3- A powerfull HandHeld to rule all of your project
https://www.reddit.com/r/mutantC/
https://matrix.to/#/!dtgavqeIZQuecenMeX:matrix.org.
There is 3 PCB you need, One is this and other 2 are below, Add this and other 2 in cart all togather.
First take a look at this in 3D using AutoDesk Fusion 360 Online her?e.
There are some key features.
- Have RTC & buzzer.
- Supports v2 Add-ons.
- A track point to have mouse support with left, right buttons.
- Gyro support using MPU6050 module & presure, temp and humidity support usin BME280 module.
- Able to turn of modules, Display, Add-ons using keyboard button.
- Full poweroff using OS and keyboard key.
- 12 pin docking port beside Pi USB ports with UART, I2C, Charging and GPIO.
- 3D parts are more solid and reduce supports when printing.
- Able to read battery voltage using Pro Micro.
- 2 LED's connected to Pro Micro with PWM support and 1 connected Pi.
- Move the stema/Qt I2c connector bottom so it is acessible from outside.
- It is fully open-source hardware. So you can Hack it as you wish.You can make your expansion-card like gps, Radio etc and attach with it.
- You can use any Raspberry-pi form factor like Asus Tinker Board S / PINE H64 Model B/ Banana Pi BPI-M4B etc. You can use Raspberry-pi zero to 4.
- You can access all the ports of the pi and the back part is attached with 4 screw.
- It can hold a 4" or 3.5" touch screen. Also have a physical keyboard attached via USB.
- 18650 battery with charge and discharge protraction .
- You can use Littlevgl make UI that don't need a OS form here.
- It don't need any custom image of Raspbian. You can use vanilla Raspbian and install the LCD driver, that's it.
- So little parts needed to make one. See the parts_list .
- You can use C Suite Application suite made more touch based device in this. This apps are suitable for small screens. See the C Suite.
- Added Adafruit STEMMA QT and SparkFun qwiic connector.
Here is the Project website.
Project files in Gitlab .
So make yours and help us to make a Community around it.
Sep 07,2020
1,732 views
mutantC_v3- A powerfull HandHeld to rule all of your project
It is a Pi handheld with physical keyboard with display and add-on support
1732
4
0
4.50 (1)
Published: Sep 07,2020
Download Gerber file 7
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(4)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
- Engineer Apr 14,2021
- Engineer Feb 23,2021
- Engineer Feb 11,2021
- Rahman Shaber Feb 03,2021
View More
VOTING
1 votes
- 1 USER VOTES
4.50
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
-
1design
-
2usability
-
5creativity
-
10content
4.50
More by Rahman Shaber
- mutantc V4 - DIY Handheld for your professional works mutantC is a Raspberry Pi UMPC. An open platform device to use any serious professional work and cre...
- mutantW V2 - Dock This only the mutantW v2 DockAn ESP32-S3 based open source smartwatch with 1.7 inch display, WiFi, B...
- mutantW V2 - DIY ESP32-S3 Smartwatch That You Can Wear Daily IntroAn ESP32-S3 based open source smartwatch with 1.7 inch display, WiFi, Bluetooth, RTC, Gyro and ...
- mutantC v4 - ThumbStick PCB mutantc V4 - DIY Handheld for your professional worksmutantC is a Raspberry Pi UMPC. An open platfor...
- mutantC v4 - Display PCB mutantc V4 - DIY Handheld for your professional worksmutantC is a Raspberry Pi UMPC. An open platfor...
- mutantC v3 - ThumbStick PCB mutantC v3 - ThumbStick PCBThis is the main project https://www.pcbway.com/project/shareproject/muta...
- mutantC v3 - Display PCB mutantC v3 - Display PCB
- mutantC_v3- A powerfull HandHeld to rule all of your project https://gitlab.com/mutantC https://www.reddit.com/r/mutantC/https://matrix.to/#/!dtgavqeIZQuecenMeX:...
You may also like
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
351 0 0 -
RF Control training board for students based on ESP32 C3
470 0 2 -
Aquarius+ Computer, Standard PCB
667 0 3 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
484 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
422 0 0 -
Nintendo Famicom HVC-001 Controller Shells
520 0 1 -
COMMODORE 128 DIAGNOSTIC REV.785260 KEYBOARD DONGLE
498 0 4 -
COMMODORE 128 15KHz DISPLAY ADAPTER (C128 80 COLUMN ADAPTER)
637 1 4 -