|
Autodesk Fusion 360Autodesk
|
mold for casting lead grids for deep cycle batteries
Mold for casting lead grids for deep cycle batteries. I have a pile of lead and need a large capacity with a long life. In my country, one cell with a life of more than 10 years costs 350 USD and self-made 20 USD. I make them from old broken car batteries.
I use a 3D printer and pet-g filament to make the containers.
I use lab source for formatting.The mold is made of mild steel, but could be made of aluminum
mold for casting lead grids for deep cycle batteries
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Aleš Dvořák
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
195 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1069 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
618 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3081 2 3 -
RadioHAT - Raspberry Pi radio development platform
2628 0 4 -
-
