Brian K. White
UNITED STATES OF AMERICA • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
|
|
|
QuartusIntel
|
|
|
|
OpenSCAD |
Description
de0-nano fpga rgb2vga
https://github.com/bkw777/rgb2vga
https://sites.google.com/site/tandycocoloco/rgb2vga
Convert 15khz RGB to 31khz VGA
Uses Altera DE0-Nano FPGA development board to convert analog 15Khz RGB signal to VGA 31Khz 256 color.
This is a clone of the original design by Luis Felipe da Costa Antoniosi, to provide the schematic, pcb, vhdl, enclosure, and docs all together in one place, and to provide editable source files using open source software instead of a zip with Eagle files, and incorporates updated resistor values from Roger Taylor.
Code
Quartus VHDL source for the fpga in the "vhdl" directory
https://github.com/bkw777/rgb2vga
Schematic and Layout
KiCad source for Schematic and PCB Layout in the "PCB" directory
https://github.com/bkw777/rgb2vga
CAD-Custom parts and enclosures
OpenSCAD model for enclosure in the "case" directory
https://github.com/bkw777/rgb2vga
rgb2vga_enclosure_top_melt_posts_014.stl
rgb2vga_enclosure_bottom_014.stl
Nov 22,2021
2,643 views
de0-nano fpga rgb2vga
RGB to VGA using DE0-Nano FPGA
2643
6
1
Published: Nov 22,2021
Standard PCB
Download Gerber file 20
BOM(Bill of materials)
Centroid file
PCBWay Donate 10% cost To Author
File Last Updated: 2024/08/31 (GMT+8)
File update record
2024-08-3108:23:58
Centroid file is updated.
2024-08-3108:23:08
Gerber file is updated.
2024-08-0722:42:39
Centroid file is updated.
2024-08-0722:42:39
Gerber file is updated.
2024-08-0710:32:23
Centroid file is updated.
2024-08-0710:32:23
Parts List (BOM) is updated.
2024-08-0710:32:23
Gerber file is updated.
2024-07-2712:21:41
Gerber file is updated.
2024-07-2705:00:47
Gerber file is updated.
2024-04-2005:34:29
CAD or technical drawing file is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(1)
- Likes(6)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Brian K. White
-
MiniNDP - RAMDisk for TRS-80 Model 100/102/200
Re-implementation of Node Systems DATAPAC / RAMPAC.1 Megabyte ram disk for TANDY Model 102 & 200...
-
512k MRAM IC-Card for TANDY WP-2
REQUIRES 1.2 mm PCBWarning: The total cost for parts for this is around $100 USDThis is an "IC-Card"...
-
LPT Capture
Capture the output from a parallel printer port.
-
TANDY Portable Disk Drive Cable
This is the special level-shifting RS-232 cable needed for the Tandy Portable Disk Drive aka Brother...
-
Molex 7880x-28 PCB Carrier
Order usingMaterial: NylonProcess: SLS (or MJF if PCBWAY starts offering it)This is the plastic ca...
-
FluxEngine Hat
Adapter PCB and snap cover for FluxEngineProvides both a 34-pin connector for normal 3.5 inch and 5....
-
Batteries for REXCPM
Provides an on-board memory battery for the REXCPMAssembly notes:For battery holders BT1, BT2, BT3 (...
-
M4ROM_TANDY - Writable multi option rom module for TRS-80 Model 100/102/200
ONLY for TRS-80 / TANDY Models 100, 102, 200Provides 4 virtual 32K EPROM from a single 128K flash ch...
-
M4ROM Programming Adapter for M4ROM_TANDY and M4ROM_27256
Programming adapter to program M4ROM_TANDY and M4ROM_27256 .Solid electrical contact with the center...
-
M4ROM 27256 - Writable multi option rom module for EPSON PX-4, PX-8, TANDY 600, any Molex 78805 socket with standard pinout
Provides 4 virtual 32k EPROM from a single 128k flash chip, in a Molex 78802 form factor to fit in a...
-
TANDY 600 RAM - TINY Version
Tiny version of 96K ram module for TANDY 600The larger card below is the original 96K ram card for c...
-
TANDY 600 RAM 96K THT
96K SRAM module for TANDY 600, all through-hole components version. Replaces Tandy Cat. No. 26-3910...
-
Teensy MounT
https://github.com/bkw777/MounT
-
TANDY 600 192K DUAL RAM
192K SRAM for TANDY 600The original option RAM banks for TANDY 600 are 96K, and the machine can acce...
-
TANDY 200 RAM 48K TSOP
48K Dual-bank option ram module for TANDY 200How to do the legs: https://gist.github.com/bkw777/52d8...
-
reQUAD - RAM Expansion for TRS-80 Model 100
Replaces the internal 32k SRAM in a TRS-80 Model 100 with a software-switchable 4 banks of 32k SRAM ...
-
ScopeShuntX
Shunt resistor for measuring current with an oscilloscope.Inspired by github.com/voltlog/ScopeShuntS...
-
de0-nano fpga rgb2vga
https://github.com/bkw777/rgb2vgahttps://sites.google.com/site/tandycocoloco/rgb2vgaConvert 15khz RG...
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
