|
|
WT32-ETH01Wireless-Tag
|
x 1 | |
|
|
MP1584EN Adjustable 3A DC-DC Converter |
x 1 |
WT32-ETH01 WLED PROJECT Board
I needed a board to mount a WT32-ETH01 ESP32 controller with a DC-DC Converter to control an addressable RGB light display
The project takes a 12v DC input to the DC-DC converter which steps it down to 5V for the ESP32. The board also has provisions for data lines (IO04, IO14, IO15, IO17) with a 4 pin header from the ESP32. There is also allowance for 2 pin headers to be installed for 5V input, TXD/RXD, and GND/IO00 to allow the WT32 to be flashed with WLED.
WT32-ETH01 WLED PROJECT Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by J Freeman
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
840 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
483 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2956 2 3 -
RadioHAT - Raspberry Pi radio development platform
2501 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4582 0 6
