|
KiCADKicad
|
WSPR-DUINO
Simply solder on your Arduino Pro Mini, Neo-6M GPS module, Si5351 clock generator, antennas and power input and you have an automated WSPR tracker suitable for following a high-altitude balloon attempting to circumnavigate the world. This is based on the design by Ken K9YO and continues to be open-sourced to allow more creators to experiment with coding, electronics, radios and ballooning.
Code must be uploaded from https://github.com/kenndaniel/K9YO_WSPR
and instructions available at https://drive.google.com/file/d/1qzOfOqM-r9QIRRdJyrX8hW_1m76IZ7H9/view?usp=share_link
and reference page https://sites.google.com/view/picoballoonsbyk9yo/transmitter
Tested May 2024
WSPR-DUINO
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Adam Ladd
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
224 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1114 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
641 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3110 2 3 -
RadioHAT - Raspberry Pi radio development platform
2653 0 4 -
-
