Morse Code Station pcb
Board designed based on this page. https://hackaday.io/project/175129-arduino-morse-code-station
I used a Arduino Nano as the main controller.
The 2 OLED headers allow for the different power connections, VCC anf GND can be swapped around, check OLED for correct pins before powering up
Can use a 9V battery or external power supply via a Barrel connection, Battery is not disconnected.
Can be mounted in a suitable enclosure with push button switch for the key and separate push button for reset as OLED screen does not clear, There is a alternate code that clears the screen after a set time.
This project was designed to allow Scouts to experience Morse Code.
I am designing a new version to use a 20 x04 LCD screen.
Morse Code Station pcb
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Michael vk6tu
-
GPS UTC clock
I wanted a UTC time clock when logging contacts with my amateur radios and the option to set my PC c...
-
Morse Code Display I2C LCD ver2-3
20 x 04 LCD Display that allows CW keyed with a Morse Code Key to be displayed as text.Using a Ardui...
-
CW sounder kit 2.kicad_pcb
CW sounder solder project.CW sounder soldering project, simple design using a 555 timer IC to make a...
-
Morse Code Station pcb
Board designed based on this page. https://hackaday.io/project/175129-arduino-morse-code-stationI us...
-
CW sounder solder project
CW sounder soldering project, simple design using a 555 timer IC to make a CW sounder for scouts to ...
-
Control cable lightening protection
Protection circuit using a GDT, Varister, Zener and capacitor, all optional but each device adds mor...
-
GPS UTC clock ver 2.1
New board designed based on my original GPS UTC clockhttps://www.pcbway.com/project/shareproject/GPS...
-
Strip board with power connection
Basic strip board for making simple projects 18 rows split in the middle for IC or similar mounting...
-
TLL to RS232 DB9 board
This simple board was designed to allow the connection of older equipment that uses a DB9 serial por...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
230 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
237 0 1 -
-
-
