CW sounder solder project
CW sounder soldering project, simple design using a 555 timer IC to make a CW sounder for scouts to try soldering, LED and adjustable tone
New board design now shared.
I have made some changes to this board, found the transistor was not required, by putting a jumper across pin 2 and 3 of the transistor, changing C2 and a couple of the resistors it will handle a larger speaker and have more volume.
R1 - 330Ω Resistor.
Connected to the LED
R3 – 10k Resistor.
Tone adjust circuit.
Higher resistance = lower tone range
R4 - 470Ω Resistors.
Volume control.
100ohm louder, 1K quiet.
C2 - Capacitor 0.1uf (104)
Changes the tone range 0.01uf
higher tone.
CW sounder solder project
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(1)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Michael vk6tu
-
GPS UTC clock
I wanted a UTC time clock when logging contacts with my amateur radios and the option to set my PC c...
-
Morse Code Display I2C LCD ver2-3
20 x 04 LCD Display that allows CW keyed with a Morse Code Key to be displayed as text.Using a Ardui...
-
CW sounder kit 2.kicad_pcb
CW sounder solder project.CW sounder soldering project, simple design using a 555 timer IC to make a...
-
Morse Code Station pcb
Board designed based on this page. https://hackaday.io/project/175129-arduino-morse-code-stationI us...
-
CW sounder solder project
CW sounder soldering project, simple design using a 555 timer IC to make a CW sounder for scouts to ...
-
Control cable lightening protection
Protection circuit using a GDT, Varister, Zener and capacitor, all optional but each device adds mor...
-
GPS UTC clock ver 2.1
New board designed based on my original GPS UTC clockhttps://www.pcbway.com/project/shareproject/GPS...
-
Strip board with power connection
Basic strip board for making simple projects 18 rows split in the middle for IC or similar mounting...
-
TLL to RS232 DB9 board
This simple board was designed to allow the connection of older equipment that uses a DB9 serial por...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
235 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
241 0 1 -
-
-
