Universal LCC Node Breakout
This is a "breakout board" for use in breadboarding LCC nodes, typically using breadboard friendly MCU Dev Boards. This board contains a 5V power supply taking from the LCC network. It also contains a CAN transceiver and contains a pair of RJ45 connectors. There is CAN termination and a place for a socket to access pins 4 and 5 ("Alt" pins) on the LCC network bus.
Universal LCC Node Breakout
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Robert Heller
-
LCC-PNET-Router
This is a "router" between a LCC network and a Pricom Lighting PNET network.It translates between LC...
-
Universal LCC Node Breakout
This is a "Breakout" board containing a 3.3V CAN transceiver, LCC RJ45 connectors, and 12V off the L...
-
Universal LCC Node Breakout
This is a "breakout board" for use in breadboarding LCC nodes, typically using breadboard friendly M...
-
ESP32 Quad Stall Motor Controller with Point Sense
This is a circuit board that supports an ESP32 Dev Kit board or TTGO-T1 board controlling four stal...
-
Pocket Beagle Quad StallMotor w/Sense base board, includes LCC CAN and power supply
This is the improved Quad Stall Motor Controller w/ point Sense base board for the Pocket Beagle. I...
-
Quad Stall motor with point sense cape
This Beagle Bone Cape implements four Stall motor drivers with point sense to your Beagle Bone. It ...
-
LCC CAN Cape for Beagle Bone Black
This cape puts your Beagle Bone Black on your LCC/OpenLCB network (http://www.openlcb.org/). This le...
-
Quad Stall Motor Controller w/ point Sense "hat"
This is the improved Quad Stall Motor Controller w/ point Sense "hat" for the Raspberry Pi. It use...
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
22 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
262 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1188 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
690 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3189 2 4 -
RadioHAT - Raspberry Pi radio development platform
2702 0 4
