Ventilator UI and Sensor Board 8-09-2020
Version 8-09-2020 of a PCB for running a ventilator system that should only be used when commercial options are unavailable. This is intended to be used with the ATMega 328PB Xplained board, however the logic interface headers are pin-compatible with Arduino boards. In theory, this is the final revision.
Ventilator UI and Sensor Board 8-09-2020
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Kevin Knowles
-
Programmable Mist Maker - XIAO / QT PY Extension
1417 2 1 -
RadioHAT - Raspberry Pi radio development platform
1195 0 3 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3557 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4234 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4615 2 2
