|
|
ESP32-WROOM-32E-N16 |
x 1 |
|
KiCad 9.0 |
|
|
Autodesk Fusion 360Autodesk
|
TubeLight - part #1
TubeLight:
This is a project that is made up of 3 different PCBs in total. There is the base and the 2 other PCBs that makes up the rail where the LED-strip is fixed. I have a prototypes with 1M and 2M long rails.
TubeLight - part #1
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Morten Frederiksen
-
PICO-RS485
The main feautures for this board are:- Raspberry Pi Pico (W) or any other variant- RS485 / MOD-bus ...
-
ESP32-S3 Testboard
ESP32-S3 Testboard:Size : 50x50mm4-layer designStack-up:TOP0.196mm prepegIN11.03 coreIN20,196mmBOTIn...
-
ESP32-C6 Demo-Board
I am working on a demoboard for espressif ESP32-C6. The ESP32-C6-WROOM-1 module is a multiprotocol p...
-
ESP32 + 2 x PICO testboard - evaluation platform
ESP32 + 2 x PICO testboard - evaluation platformThis is a testboard that i did as I wanted a platfor...
-
SCD43 + SHT31 testboard
This is a small testboard for the Sensirion:SCD43 (CO2 sensor)SHT31 (Humidity sensor)Size 40x29mm - ...
-
TubeLight - part #3
this is one of the discs that makes up the rail for the TubeLight
-
TubeLight - part #2
TubeLight,This is a part of the rail that carries the LED strip
-
TubeLight - part #1
TubeLight:This is a project that is made up of 3 different PCBs in total. There is the base and the ...
-
TCAL9539PWR - I2C 16 bit I/O port expander - breakout board
MBOB-TCAL9539PWRThis is a breakout board for the Texas Instruments TCAL9539PWR. This is a 16 bit I/O...
-
MSPM0C1104S8YCJR (The World's smallest MCU) - Tiny QWIIC connector board
This is a demoboard showcasing the wolrd's smallest MCU on PCB with QWIIC connector and LEDs
-
MSPM0C1104S8YCJR (The World's smallest MCU) - Demoboard
This is a demoboard showcasing the wolrd's smallest MCU
-
LEDstrip 8 x 5.0x5.0mm LEDs (SK6812, WS2812 or similar)
RGB LEDstrip (WS2812B or SK6812)8 x 50x50 LEDsVCC and GND Solder PadsData IN and Data Out solder Pad...
-
HUB75 P2.5 RGB matrix display controlled by Raspberry Pi Pico W
Check out on how to make your own shield
-
Breakout-16 PCB v1.0
Here is the design for the 4 x 4 breakout boardsYouTube video link:
-
Nerd level YouTube Button Version 2 [ESP32, RGB LED Matrix, 3D]
Learn how to make your own advanced YouTube button packed with a lot of cool features, such as speak...
-
iot-thing, universal iot development board
iot.thing is a basic module for doing your first iot projects. The module is based on an ESP32-WROOM...
-
Programmable Mist Maker - XIAO / QT PY Extension
1036 2 1 -
RadioHAT - Raspberry Pi radio development platform
840 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3296 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3913 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4292 2 2
