Snes Flash Cart USB PROGRAMMER device
This pcb is a DIY that has everything you need to build your own SNES flash cart programmer. This is used for the Snes flash carts that RetroCircuits makes (which will also be hosted here at PCBway). Included id the firmware for the microcontroler, a Youtube link showing how to build and of course, PCBway can also build this pcb. A FULL build of materials and instruction document also included.
Snes Flash Cart USB PROGRAMMER device
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Mark Frisbie
-
Snes 1A3B mapper adapter
If you like modding Snes cartridges, then this may help you. The cartridge designator "1A3B" is the ...
-
Snes Flash cart by RetroCircuits
Snes reproduction pcb that is flashable with a flash programmer device that RetroCircuits also makes...
-
Snes Flash Cart USB PROGRAMMER device
This pcb is a DIY that has everything you need to build your own SNES flash cart programmer. This is...
-
W08640ASY532_Snes 1L5B-20
This is a reproduction of the SA-1 SNES cartridge pcb 1L5B-20 that uses the 27c322 eprom.PCB is 102....
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
791 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
447 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2921 2 3 -
RadioHAT - Raspberry Pi radio development platform
2477 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4560 0 6
