Raspberry Pi Pico Breakout Board:

A low cost, high spec breakout board for Raspberry Pi Pico.

Features:

• Battery charging and Management
• Cost effective design
• 2.54mm Pitch Pin headers for external connectivity
• Silk Screen Markings for Raspberry Pi Pico Pinouts
• QWIIC connector for added Practicality
• RGB LED (WS2812) On Board
• Minimalistic Design
• Charging Indicator LED
• Compatible With 3.7V LiPo and Li-ion Batteries
• On Board Power filter and stabilization
• Separate Header Pins for SPI, UART & I2C Bus for ease of access.
• JST PH2 (Industry Standard) Connector for battery.
• 4x 2mm Mounting holes

Dimensions:

• Size:70.09mm x 55mm
• Thickness: 1.6mm (PCB Excluding components)
• Thickness: 5.2mm (Combined)

User Guide:

Please go through the Details for better understanding and Usability.

• Use 3.7V Lipo battery
• Checkout the silkscreen markings for Battery Polarity
• Be careful while using external power for Raspberry Pi Pico By VSYS. (More Details: https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf).
• Use female wires to connect external peripherals.
• Follow Raspberry Pi Pico Guidelines for I/O Voltages

Technical Information:

• Signal Layers:2
• None Signal Layers:10
• Components:18
• Pads:119
•  Surface Pads:83
•  Plated Through-hole Pads:36
•  None Plated Through-hole Pads:0
• Holes:4
• Vias:17
• Nets:41/41
• Length of Tracks:1435.73mm
• Copper Areas:2

Open Source design:

All the CAD and manufacturing files are open source and available at: https://github.com/maitesam/Raspberry-Pi-Pico-Breakout.git