Raspberry Pi RGB Matrix HAT

A RGB LEDs Hat for raspberry Pi 3B and Up models. Featuring a WS2812 LED in matrix form factor.

Features:

• 5X Rows and 5X coloumns
• 5x5 Matrix Form factor
• Close Placement for added Display Quality
• Can DIsplay Numbers in 7-Seg Form
• 5V operating LEDs
• Addressable by GPIOs
• 5X GPIO Pins for addressing
• Powered by Raspberry Pi

Instructions:

• Use Raspberry Pi GPIO to Program
• See the attached schematic for Pin Mapping reference
• Apply max 5V to the RGB LED HAT
• 
  

Dimensions:

• Size:65.08mm x 55.99mm
• Signal Layers:2
• Holes:4x For M2 Screws
• Copper Areas:2

Display Form Factor:

• 5x5 LEDs are arranged in display Form factor so you can print cool ideas and designs using it.

Open Source Design:

This Project is created under open source hardware design and can be used without permissions. See GitHub link for details

Editable Hardware:

You can use the available source files to modify design according to your choice. Source Files are given on the GitHub Repo.