AudioDIWHY
UNITED STATES OF AMERICA • + Follow
Description
RP2040 Clock Multiplier Development Board
I have some RP2040 code to write and didn't want to Breadboard the hardware, so I whipped up a development board. Uses RP2040, a standard rotary encoder, an OLED and some LED's. One of the GPIO's is buffered with a 2N3904 transistor.
More details are in the blog post here: https://audiodiwhy.blogspot.com/2024/05/rp2040-dev-board-more-encoding-less.html
Code
Github repo for test C code for this dev board
https://github.com/cslammy/Encoder-Dev-Board
Schematic and Layout
Kicad files
Clock Multiplier 5-11-24 Kicad files.zip
BOM CSV
encoder dev board 5-11-24 BOM.csv
PDFs of board and schem
clock multiplier dev board 5-11-24-schem and PCB PDFs.zip
May 25,2024
145 views
RP2040 Clock Multiplier Development Board
Extends RP2040 with an OLED and Rotary Encoder.
145
0
0
Published: May 25,2024
Download Gerber file 1
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/07/08 (GMT+8)
File update record
2024-07-0817:02:08
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Under the
Attribution-MIT
License.
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by AudioDIWHY
-
Bench 4x2 Bluetooth Mixer
Simple 14HP Eurorack 4x2 synth mixer.outputs are 2x 100mil terminal posts on rear of PCB.You will ne...
-
Anything to Clock--LM311 based
I needed a simple circuit to condition incoming signals so a MCU could read them as clock:--rectify ...
-
Vactrol Based Audio Envelope Follower
An audio envelope follower based on a 5C3 Vactrol. Useful for auto-wah (send its output to a bandpas...
-
Warm Floater Eurorack Power Extender
I ran out of physical connections on my Eurorack Power supply. This PCB supplies 1 input and 3 outpu...
-
"KiCADSR" Euro Envelope Generator
This is my first project using KiCAD for EDA instead of Autodesk Eagle.I wanted to see if I had the ...
-
Low Noise Preamp based on Arp 2600 Synthesizer
The Arp 2600 synthesizer has a preamp that takes an unbalanced signal and amplifies it 10x, 100x, an...
-
Arp 2600 clone--inverter-mixer
The ARP2600 is a legendary, classic semi-modular analog synthesizer. Its voltage processor circuitr...
-
SEEED XAIO RP2040 ADC and Buffer Board
The SEEED XAIO RP2040 is a fantastic little dev board, featuring the RP2040 MCU.I needed a buffered ...
-
Rotary Encoder Experimenter's Dev Board
I want to learn more about creating user interfaces for embedded system projects, so I made a board ...
-
RP2040 Clock Multiplier Development Board
I have some RP2040 code to write and didn't want to Breadboard the hardware, so I whipped up a devel...
-
Anything to Clock--Precision Rectifier
For more details please see this blog post:https://audiodiwhy.blogspot.com/2024/04/anything-to-clock...
-
Hardware Encoder Debounce Board
For details about this project please see this blog post: https://audiodiwhy.blogspot.com/2024/01/ro...
-
DSPG1 4 voice synthesizer on a single PCB
The DSPG1 is a $20 IC--along with a handful of external parts this chip gives you a complete a 4 voi...
-
Son of Warm Floater
I ran out of power spigots in my Eurorack, this simple project takes a 16 conductor +/- 12V, GND, 5V...
-
ARP 2600 Audio Switch
The legendary ARP2600 has a pop free/click free clock driven analog switch. Each rising clock switch...
-
DG401 Audio CMOS switch Experimenter's Board
I was curious how the DGx0x series analog switches sounded and didn't want to breadboard a DG401 wit...
-
ARP2600 Lag Processor Clone
The Arp 2600 "Voltage Processor" section is one of the many designs that makes this legendary synth ...
-
Eurorack Bench Mixer
I needed a bench mixer for my Eurorack workbench setup--to replace the Frac-formatted audio bench ge...
You may also like
-
-
-
-
-
Electronic Enclosure applied for electronic projects
102 0 1
