RF Amplifier Controller
Controlling RF Amplifier requires a precise timing of TR Switch, Band selections, Overheat protection, SWR protection.
The controller presented here tries to accommodate all of the required feature.
Software can be downloaded from GitHub (https://github.com/nwputra/RF-Amp-Controller)
You are free to make the PCB based on this project but not for sale.
I am just an hobbyist on Amateur Radio and shares to other fellow Amateur.
Contact me on YB1NWP page.
73
RF Amplifier Controller
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Nyoman Putra
-
3 Band HF Amplifier Controller
This is another version of HF Amplifier Controller Board.It use AVR ATMEGA8 or pin compatible (ATMEG...
-
RF Amplifier Controller
Controlling RF Amplifier requires a precise timing of TR Switch, Band selections, Overheat protectio...
-
Programmable Solid State Current Limiter
This device will allow programmable limit of current to the load. With component values as in schema...
-
RF Directional Coupler
RF Directional Coupler using PCB as coupling.Bottom layer is just a ground plane.The design is then ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1837 2 2 -
RadioHAT - Raspberry Pi radio development platform
1564 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3797 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4549 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5350 2 2 -
