Picaxe 20X2 prop controller Revision 4
This is the latest revision of this project (version 4). It is a robotic or prop controller based on the Picaxe 20Xe processor. It has a built in MP3 module, 8 inputs that can be set to high or low with 10K resistors, 6 servo outputs, a piezo sounder, on board 5 volt power supply, option for external power for the servos, High current ULN2803A output chip option, and an I2C port
Picaxe 20X2 prop controller Revision 4
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(1)
More by Engineer
-
Picaxe 20X2 prop controller Revision 4
This is the latest revision of this project (version 4). It is a robotic or prop controller based on...
-
Picaxe 20X2 prop controller.kicad_pcb Version 3
A controller board based on the Picaxe 20X2 chip with integrated MP3 connector, I2C connector, High ...
-
Adapter Board to be used with my Picaxe 20X2 prop controller board
Adapter Board to be used with my Picaxe 20X2 prop controller board to be able to mount the MP3 playe...
-
Picaxe 20X2 Prop / Robot controller
This is a Prop / Robot controller based on the Picaxe 20X2 controller. The controller can operate up...
-
Programmable Mist Maker - XIAO / QT PY Extension
1003 2 1 -
RadioHAT - Raspberry Pi radio development platform
806 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3262 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3883 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4259 2 2
