Parallel circuit (one component) for learning and teaching
I wanted a fun and educationalway for people to learn so I created this!
Parallel circuit (one component) for learning and teaching
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by . Real Space Pro
-
Camera 5x5 pixels
This 5x5 camera uses transistor logic to select which pixel to output the value of, all outputs are ...
-
JK FlipFlop
A JK Flip Flop made of transistors and resistors
-
BareFemtoPanel x 90
At $0.25 per microcontroller, Each Panel's Base Cost is ~$22.510 panels (900 microcontrollers) would...
-
Bare Femto Development Board
I was thinking to myself....."what if I could have a cheap, tiny microcontroller that was open sourc...
-
DC Power Supply With 10 Outputs From 3.3v to 12v USB
I Spent A while Wondering What To Do With My Knewfound Knowledge And I decided A DC Power Supply Wou...
-
Smallest 3 bit binary decoder! (21mm by 11mm)
The Smallest 3 bit binary decoder made with discrete transistors
-
radio transmitter (fixed, 3v)
The previous design had some issues so this is the fixed version and I have also reduced the needed ...
-
2 bit binary decoder
after FOREVER I have finally learnt how computers work at the transistor scale AND how multiplexing ...
-
DIY OR gate
A diy OR gate! made qith two transistors
-
AND gate, diy computer blocks
I watched a Video on how computers work and found this simple and gate circuit!
-
PCB Prototyping board, no layered connections
I Wanted To make Prototyping Boards Available To Everyone, so I Made This!
-
6x6 LED Screen For Arduino DIY screen and led hat for arduino! (Pin 1 to 12)
THIS TOOK TOO LONG TO WIRE!!!! but, I Finally made It! A Little LED Screen That you Can Use With You...
-
Diy PCB Perfboard
This is a very complicated design for A perfboard that I made A long time ago, I hope You Enjoy it!
-
Mini brushed motor servo gear reduction 256:1
I wanted to make diy servos possible, so I made this!
-
Copper ion/ zinc ion battery structure
I wanted to make a 2.4v diy battery so I made This! Put hte metal electrodes in an opposite pattern
-
Fidget cone
I spent A while searching for the perfect satisfying fidget toy, and I came accross this!I decided t...
-
Parallel circuit (one component) for learning and teaching
I wanted a fun and educationalway for people to learn so I created this!
-
Joule Thief
I thought of how a normal joule thief works, tweaked it, made it smaller and violla! You Get This PC...
-
Programmable Mist Maker - XIAO / QT PY Extension
1061 2 1 -
RadioHAT - Raspberry Pi radio development platform
867 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3323 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3933 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4320 2 2
