|
arduino IDEArduino
|
|
|
KiCADKicad
|
Nano sliding gate control
Here is a sliding gate controller project based on arduino nano. This project was created when the previous controller was destroyed by storms. It controls an AC motor, whose rotation is counted by a hall sensor, and current consumption by an acs712 module. The control is done by a radio module at 433 frequency.
Nano sliding gate control
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
1150 2 1 -
RadioHAT - Raspberry Pi radio development platform
960 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3382 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4001 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4390 2 2
