|
|
BC546 |
x 2 | |
|
|
S8550 |
x 2 | |
|
|
S8050 |
x 2 | |
|
|
1N4148Any
|
x 4 | |
|
|
2.2 µF cap or smaller |
x 1 | |
|
|
550 ohm, or similar value, resistor |
x 4 | |
|
|
1k resistor |
x 2 | |
|
|
10k resistor |
x 1 |
Mini H-Bridge motor control
This is a mini H-Bridge.
The S8050 and S8550 are PNP, and NPN transistors to change the direction of the motor. They use the 550ohm, or similar, resistors.
The two BC546 transistors are used to make the inverters. They have the 10k and the 1k resistors. These are the ones at the bottom of the board.
Mini H-Bridge motor control
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Randi Middleton
-
Larger H-Bridge
This is a single H-Bridge circuit that has bigger traces and uses bigger transistors.You can use the...
-
Mini H-Bridge motor control
This is a mini H-Bridge.The S8050 and S8550 are PNP, and NPN transistors to change the direction of ...
-
W352442ASZ29_motor control dual
A dual motor control that uses TIP, or similar, transistors to make a dual H-Bridge circuit.You need...
-
Programmable Mist Maker - XIAO / QT PY Extension
1032 2 1 -
RadioHAT - Raspberry Pi radio development platform
833 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3286 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3908 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4286 2 2
