|
|
no components needed |
x 1 |
Low profile USB plug
- only 3mm protrudence from the connector
- 2.54mm hole spacing, solder wires directly or add header pins
- shield connections
- 2u gold plate
This is an ultra low profile USB A male plug designed for embedded applications where standard USB connectors take up too much space.
Add epoxy or hot melt over the wires if strain relief is required.
Note that this plug is not suitable in applications where it may be inserted upside down, as the shield terminal will short the USB power.
Low profile USB plug
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(5)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
4usability
-
4creativity
-
10content
More by Julian Phillips
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
221 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1110 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
640 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3106 2 3 -
RadioHAT - Raspberry Pi radio development platform
2651 0 4 -
-
