|
|
LocoConnect FirmwareRoeland Kluit
|
|
|
|
Loconet ProgrammerRoeland Kluit
|
LocoConnect I2C Loconet Interface card - SMD version
LocoConnect controller board - SMD version
The LConnect is a low cost efficient Loconet feedback and accessories decoder for model railroad. It is created to allow extensive but affordable interaction between the loconet bus and model railroad equipment. It has far more features than most commercial of the shelve devices. However, due to the limits of the relatively cheap ATmega328p cpu, the possibilities are not endless. The controller has the following features:
Native S88/S88n interface
I2C based occupation
Local occupation pins
Control Signals, Leds and servo
More info: LocoConnect/README.md at main · LocoConnect/LocoConnect
LocoConnect I2C Loconet Interface card - SMD version
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(0)
More by Roeland Kluit
-
LocoConnect I2C Loconet Interface card - Trough hole
LocoConnect I2C Loconet Interface card - Trough hole versionThe LConnect is a low cost efficient Loc...
-
LocoConnect I2C Loconet Interface card - SMD version
LocoConnect controller board - SMD versionThe LConnect is a low cost efficient Loconet feedback and ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1087 2 1 -
RadioHAT - Raspberry Pi radio development platform
909 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3344 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3959 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4343 2 2
