LisaKeysPlus
There are actually two keyboards pictured. I created two since I have two Lisas. :) The first keyboard is the one in the case actually connected to the Lisa and the second is the PCB underneath without keycaps to show what the inside looks like. :) The keycaps are custom-printed. The Lisa has some rather frustrating non-standard keys: I had to make the two keys on either side of the spacebar wider to make the spacebar shorter to the point where I could find one that size (original is 7.5u, this one is 6.5u) and the 1.5u backspace is unobtainium so it's a relabeled tab/backslash and the height is off. :P The image on the monitor is wavy because this was taken just before the power supply went unstable and I had to shut it off. :(
LisaKeysPlus
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Rebecca Bettencourt
-
A Compact Charging Breakout Board For Waveshare ESP32-C3
482 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
489 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
684 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
673 0 1
