|
fusion360 |
Light Cage for Robby the Robot Gyro mechanism
Please visit Ogrinz Labs on YouTube for more information on building a Robby the Robot replica.
I use these parts in this video: https://youtu.be/Mn8EpX_qRFA
Please order these parts printed in UTR-8100 (transparent) resin, with color: Transparent-Spray varnish
Light Cage for Robby the Robot Gyro mechanism
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Mike Ogrinz
-
Light Cage for Robby the Robot Gyro mechanism
Please visit Ogrinz Labs on YouTube for more information on building a Robby the Robot replica.I use...
-
Robby the Robot Gyro Disc
This is the clear disk (3 are required in total) that are used in Robby the Robot's head/dome gyro m...
-
Robby the Robot - All Clear Head Parts
If you are building a full-size Robby the Robot replica, you can use these pieces to complete his "f...
-
Programmable Mist Maker - XIAO / QT PY Extension
1171 2 1 -
RadioHAT - Raspberry Pi radio development platform
976 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3395 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4019 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4411 2 2
