LM1875 high current +TIP35+TIP36
This amplifier is based on the LM1875 integrated circuit, which respectively drives a TIP35 and a TIP36. A single power supply has been used to separate the supplies from the transformer. In addition, the output decoupling capacitor also functions as protection against DC output current, consisting of a SnapIn electrolytic capacitor ø25mm and a capacitance of 4700uF, alongside a 4.7uF MKP capacitor. At the input, we have an audio MKP capacitor, as well as a high-pass and low-pass filter. The signal ground is separated from the GND. For leveling, we have a SnapIn ø25 capacitor with a capacitance of 2200uF, alongside a 4.7uF MKP capacitor and a ceramic capacitor with a capacitance of 100nF. The trimmer regulates 1/2Vcc.
LM1875 high current +TIP35+TIP36
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(4)
- Likes(4)
-
Amplifier MX5OnisA (THE BLAMELESS AMPLIFIER CONCEPT)
Questa versione di amplificatore è molto simile al "THE BLAMELESS AMPLIFIER CONCEPT"http://www.dougl...
-
Amplifier LoniTip100
Questo amplificatore è il 2° della linea LoniTip100ha una potenza di 100w rmsalimentazione +-45vrego...
-
Amplifier Loni Tip50
Questo amplificatore, il più piccolo LoniTip50ha una potenza di 50w rmsalimentazione +-35vregolazion...
-
Preamplificatore AjeanMos a simmetria complementare
Questo preamplificatore è progettato a simmetria complementare.Il differenziale si compone di una do...
-
ProtoDac DileOnisA TDA1387 x8 R2R DAC a calibrazione continua, per Raspberry
This is a new version of the Protodac. Different from the original only in terms of layout. The dac-...
-
Lonisino Class AB 50w amplifier
Lonisino project,a simple amplifier with good performance.Through the videos you can see all the ste...
-
The gainclone LM3875
The Gainclone LM3875https://phonoclone.com/diy-gc.html
-
Preamplifier RagnaMos 1.5
This preamplifier is built around a small MOSFET, the BS170. The current source is composed of a JFE...
-
LM1875 high current +TIP35+TIP36
This amplifier is based on the LM1875 integrated circuit, which respectively drives a TIP35 and a TI...
-
LM3875 Amplifier
This amplifier is based on the LM3875. The signal ground has been separated from the GND, and a high...
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
357 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
700 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
681 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
898 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
776 0 1
