|
KiCad 8.0KiCad
|
Keyboard Connector Replacement PCB, 10-pin
A PCB suitable to inserting into the type of connector used for membrane keyboards in vintage computers. Designed for, and tested against, Amstrad CPC machines but should be suitable for other makes and models.
IMPORTANT: MUST be manufactured with a PCB thickness of 0.6mm. Any thicker and they won't insert into the connector.
Tip: Try adjusting the 'quantity' at your fab. We find PCBWay will manufacture ten of these for the same price as five.
Bill of Materials
No additional components are required.
Licence
CERN-OHL-P
Keyboard Connector Replacement PCB, 10-pin
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Mike Sutton
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
155 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1008 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
576 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3045 2 3 -
RadioHAT - Raspberry Pi radio development platform
2595 0 4 -
-
-
