Iron Man Arc Reactor Prop
these PCBs combined with the modified crashworks code will allow you to make an illuminated Arc Reactor using neopixels. When connected to power using the pogo connectors mounted to the arc reactor and the baseplate, the Arc reactor will boot up, making a sound and illuminating the neopixels. If you decide to connect a button to the button pins, a click of the button will boot down the arc reactor, making a noise and turning off the neopixels. For more info, please check out the full video on youtube!
Link: https://youtu.be/Z3E5Pl5Wy_k
Iron Man Arc Reactor Prop
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Plentiful_Props_3D
-
ESP32-S3 breakout board for motorizing Iron Man helmets
this PCB will allow you to create a breakcout board for a WaveShare ESP32-S3 specifically for the pu...
-
Iron Man Repulsor Glove PCB (with laser)
This PCB will allow you to build your very own Iron Man repulsor glove, complete with movement based...
-
Helldivers 2 Strataem Ball Prop PCB
This PCB will allow you to add lights and sounds to the MakerLab Stratagem Beacon from Helldivers 2!...
-
PP3D ESP32 breakout board for Iron Man helmet voice recognition module
this PCB is abreakout board for a WaveShare ESP32-S3 which will allow you to easily wire up and cont...
-
Iron Man Repulsor Glove PCB
This PCB will allow you to build your very own Iron Man repulsor glove, complete with movement based...
-
Helldivers 2 Sample Container Prop
Check out the drive link to get access to the other PCB gerber files (common sample and RGB array) a...
-
Iron Man Arc Reactor Prop
these PCBs combined with the modified crashworks code will allow you to make an illuminated Arc Reac...
-
Breakout Board for Motorizing Iron Man Cosplay Helmets!
This is a PCB breakout board intended to be used for motorizing Iron Man helmets. With an ATTiny85 U...
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
78 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
553 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
543 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
752 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
710 0 1
