|
|
ATTiny85 USB board |
x 1 | |
|
|
JST-PH 2.0MM 2 PIN FEMALE |
x 4 | |
|
|
JST-PH 2.0MM 3 PIN FEMALE |
x 2 |
Breakout Board for Motorizing Iron Man Cosplay Helmets!
This is a PCB breakout board intended to be used for motorizing Iron Man helmets. With an ATTiny85 USB controller and a few JST PH 2.0 connectors, you can quickly motorize a helmet in a pinch. This PCB is meant to be used with Crashworks3D's ALISHA mini code, and the connectors on the board correspond to their pinouts. In terms of functionality, this my a very barebones version of the ALISHA mini boards, and only has the bare minimum in terms of connectors to motorize an Iron Man helmet (2 servos, button, 5V input, and 2 pins for the eyes).
If you would like to see a step-by-step tutorial for making your very own Iron Man helmet, I've made a four-part series on my Youtube channel that you can follow along with!
Link:
https://www.youtube.com/@plentifulprops3d
Breakout Board for Motorizing Iron Man Cosplay Helmets!
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(11)
More by Plentiful_Props_3D
-
ESP32-S3 breakout board for motorizing Iron Man helmets
this PCB will allow you to create a breakcout board for a WaveShare ESP32-S3 specifically for the pu...
-
Iron Man Motorized helmet breakout board for ESP32 S3 Mini
Please watch this YouTube tutorial covering how to 3D print, assemble, solder the PCB, and upload th...
-
Iron Man Repulsor Glove PCB (with laser)
This PCB will allow you to build your very own Iron Man repulsor glove, complete with movement based...
-
Helldivers 2 Strataem Ball Prop PCB
This PCB will allow you to add lights and sounds to the MakerLab Stratagem Beacon from Helldivers 2!...
-
PP3D ESP32 breakout board for Iron Man helmet voice recognition module
this PCB is abreakout board for a WaveShare ESP32-S3 which will allow you to easily wire up and cont...
-
Iron Man Repulsor Glove PCB
This PCB will allow you to build your very own Iron Man repulsor glove, complete with movement based...
-
Helldivers 2 Sample Container Prop
Check out the drive link to get access to the other PCB gerber files (common sample and RGB array) a...
-
Iron Man Arc Reactor Prop
these PCBs combined with the modified crashworks code will allow you to make an illuminated Arc Reac...
-
Breakout Board for Motorizing Iron Man Cosplay Helmets!
This is a PCB breakout board intended to be used for motorizing Iron Man helmets. With an ATTiny85 U...
-
Programmable Mist Maker - XIAO / QT PY Extension
1423 2 1 -
RadioHAT - Raspberry Pi radio development platform
1198 0 3 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3560 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4238 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4617 2 2
