ICSP Pogo Pin Adapter
To make it easier to program chips like the ATtiny85 etc, I made this 6-pin pogo adapter with two identical PCBs. The kit, as seen below, consists of a pair of PCBs, along with a single standoff, (2) M3 screws, (6) pogo pins, and a 6x2 pin header arrangement:
Pogo pins are soldered to one PCB using a jig shown below, as is the 6x2 arrangement of header pins. It's quite a simple project, but something that should help me, and hopefully others, more easily program chips that are already soldered on to PCBs. I'm quite happy with how it turned out!
The kit is available for sale on Tindie, or full assembled for a fairly exorbitant fee. The printable jig can be downloaded here.
ICSP Pogo Pin Adapter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(4)
More by Jeremy Cook
-
Light Up Business Card
PCB business card made with KiCad and other software. Coin cell battery lights up an 0805 SMD LED. P...
-
3D-Printed Camera Mount
This 3D-printed magnetic camera mount can accommodate clamp arms with its central stud, or it can us...
-
Sound Reactive Guitar Strap
This project uses the Circuit Playground Express (CPE) board by Adafruit and its built-in microphone...
-
Pico Touch 2 Raspberry Pi Pico Capacitive Helper
I made the Pico Touch 2 board shown in the video above after frustration with supplying my own THT r...
-
MIDI Kalimba Musical Instrument
After seeing a miniature Kalimba finger piano instrument, I realized I could convert it to a MIDI co...
-
LED-No-Solder
The LED-No-Solder PCB encapsulates a coin cell battery within the PCB using forks on either side for...
-
Tripple Face Clock With PCB Diffuser
In a previous writeup and video, I made a clock using a PCB as a diffuser. In this continuation of t...
-
Clock 742 PCB Diffuser Clock
The Clock 742 PCB clock uses a base PCB to connect 85 SK6812 addressable LEDs, and a Wemos S2 ESP826...
-
ICSP Pogo Pin Adapter
To make it easier to program chips like the ATtiny85 etc, I made this 6-pin pogo adapter with two id...
-
Miniature PCB Tester
I order and sell a number of EZ Fan 2 fan/load controller boards, and while the quality is excellent...
-
Raspberry Pi PCB Enclosure
PCBs are incredibly strong, and can be obtained for a very reasonable price. Based on published Rasp...
-
LED Cube Flower Arrangement With WLED
This project mounts 5 WS2812B LEDs on a cube made out of castellated PCBs. Five of these tiny PCBs a...
-
Mechanical Macro Keyboard Music Maker
Computer macro pads/stream decks/auxiliary keyboards normally control computer input functions with ...
-
JC Pro Macro Rotary Input
The JC pro Macro acts as a rotary input and auxiliary macro keyboard for your PC, powered by an Ardu...
-
Triple Zone PIR Workbench Lighting
After building a 7 ft x 3 1/2 foot workbench, I installed 12V overhead lighting, as outlined in this...
-
12V Overhead LED Lighting Control
After building a workbench with overhead storage, I installed 12V LED strip lights to illuminate my ...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
230 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
236 0 1 -
-
-
