|
ONSHAPE |
High Performance Model Rocket Fin
This product is a fin designed to be placed onto the supersonic 18mm model rocket kit I am developing, here I am selling parts so you too can help test this out. These fins are to be made from HP PA12 Nylon, and the weight is planned to be 0.5g per fin. If you want to build one of your own to test just look for the next parts I share, and for some base information. You will need a Aerotech Q-Jet D20-8W 18mm Rocket motor. Thank you for considering my Model.
High Performance Model Rocket Fin
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Wyatt Rowley
-
Programmable Mist Maker - XIAO / QT PY Extension
1097 2 1 -
RadioHAT - Raspberry Pi radio development platform
915 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3345 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3961 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4347 2 2
