H-Pad Passive Audio Splitter with switchable attenuation
H-Pad Passive Audio Splitter with switchable attenuation. Has a pass-through, and a 3/4 position switch that allows for -5, -10, and -15dB (And -0 in the case of a 1p4t switch - the fourth connection breaks the circuit)
Supplies 1 (female XLR-3) input and 2 (male xlr-3) outputs. One output is pass-through, one output is switchable passive attenuation.
Use 1p3t switch for -5, -10, and -15 options, use 1p4t for additional -0db (second pass/ splitter option). Leave 4th pin unconnected (circuit break.)
H-Pad Passive Audio Splitter with switchable attenuation
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Hula-Cow Studios
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
174 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1045 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
595 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3063 2 3 -
RadioHAT - Raspberry Pi radio development platform
2613 0 4 -
-
