GM Aircore Motor Needle glow
This is 17.54mm led mount with a 2.95mm center hole for the motor shaft. The resistor is a 2010 ane the LEDs are meant to have only 1 populated. It's just 2 different pad sizes one being 3528 and the other being 2835
The attached BOM is for a white LED and a 210-ohm resistor. Substitute the resistor and LED for your desired color and current.
GM Aircore Motor Needle glow
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(0)
More by Matthew Garner
-
Programmable Mist Maker - XIAO / QT PY Extension
2744 2 3 -
RadioHAT - Raspberry Pi radio development platform
2363 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4464 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
5262 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5983 2 2 -
