Ensoniq ESQ-1 EEPROM Cartridge
https://github.com/JamesHagerman/Ensoniq-ESQ-1-EEPROM-Cartridge
Ensoniq ESQ-1 EEPROM Cartridge
This repo contains an open source hardware design for a EEPROM-based patch storage cartridge for the Ensoniq ESQ-1 and SQ-80 hybrid synthesizers.
Assembly Details
Latest assembly instructions and errata can be found in the PDF at the root of this repo.
The PCB is designed to support AT28C64 and AT28C256 (or similar) EEPROM's. The larger EEPROM option can be controlled using 2 switches (purple wires in the photo below).
The cartridge can also be configured as a "read-only" cartridge with some reducion in parts count.
The current 3D printed enclosure design is provided as a Fusion 360 file. The two halves of the case are inteded to be held together either using a press fit or with clear packing tape. Not elegant, but it works.
Ensoniq ESQ-1 EEPROM Cartridge
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Engineer
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
669 0 1 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1197 3 6 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1063 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
1322 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
1057 0 1
