|
Home Assistant OS |
|
|
Esp Home Home Assistant AddonEsp Home
|
ESPClicker
ESPClicker is a very simple, ESP8266-based IoT project that will allow you to integrate your normal devices such as a coffee machine, fan, etc, into your Smart home "make them all IoT enabled". Works with Home Assistant And ESPhome.
Technical Specifications
- 4 Layer PCB
- WiFi Module ESP8266 ESP-12F
- 3x Built-in signal relays ( Control PINS: R1-GPIO4, R2-GPIO5, R3-GPIO12 ) "R1 can be configured as normally open or normally closed" MAX LOAD 500mA 24V
- 2x Low-Side Switch "ULM2003" ( Control PINS: LS1-GPIO14, LS2-GPIO15 ) MAX LOAD 300mA
- 1x ADC Pin "1V Max"
- 1x ACS Pin "AC Power Detector" (Input Pin GPIO13)
- Requires 4-6V 500mA power supply
ESPClicker
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(8)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Priceless Toolkit
-
Programmable Mist Maker - XIAO / QT PY Extension
1150 2 1 -
RadioHAT - Raspberry Pi radio development platform
960 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3382 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4001 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4389 2 2
