|
KiCADKicad
|
|
|
|
SigmaStudioAnalog
|
DSP Amplifier - 2 inputs 4 outputs
An amplifier with DSP processor based on TPA3116D2 and ADAU1701 with 4 outputs and stereo input. DSP programming is done with SigmaStudio and needs an appropriate programmer.
DSP Amplifier - 2 inputs 4 outputs
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(8)
More by Kuro Kuro
-
4 Channel Signal Relay Switching Board
4 Channel Signal Relay Switching BoardA simple opto isolated 4 channel relay switch board for small ...
-
DSP Amplifier - 2 inputs 4 outputs
An amplifier with DSP processor based on TPA3116D2 and ADAU1701 with 4 outputs and stereo input. DSP...
-
PT2258 Volume Controller
PT2258 Volume ControlerThis circuit controls the volume of up to 6 channels from 0dB to -79dB.Connec...
-
DT555 - Discrete Component 555 timer
This is a 100x65mm 555 timer heavily based on Evil Mad Scientist's Three Fives, almost identical. Bu...
-
Discrete 555 Blinky Xmas Tree
Xmas tree that creates a 555 timer from transistors and resistors and configures it as an astable mu...
-
Programmable Mist Maker - XIAO / QT PY Extension
1147 2 1 -
RadioHAT - Raspberry Pi radio development platform
957 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3381 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3997 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4389 2 2
