Bottom
DIY arduino uno r3
DIY arduino uno circuit.its used just like a regular arduino uno all u gotta do is get the components and solder them ,and u also need a USB to TTL converter to program this. :)
you will need : ATmega328p (with holder),22pf capacitor(3),220Ω resistors(2),LED,male pin headers,16MHZ crystal, 4 pin tactileswitch, LM7805 (1),LM338(1) and a USB toTTL coverter
solder all the components to the board and when programming u can us ethe USB to TTL coverter. once u are done programming , its ok to remove the converter.
PLS LIKE MY PROJECT :)
the youtube video at the bottom is not mine but it will be usefull if u watch it before starting :)
DIY arduino uno r3
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(3)
- Likes(13)
- 9 USER VOTES
- YOUR VOTE 0.00 0.00
-
1design
-
2usability
-
3creativity
-
5content
-
10design
-
7usability
-
7creativity
-
5content
-
9design
-
8usability
-
9creativity
-
8content
-
9design
-
9usability
-
9creativity
-
9content
-
10design
-
10usability
-
10creativity
-
10content
-
1design
-
2usability
-
3creativity
-
5content
-
9design
-
9usability
-
9creativity
-
9content
-
10design
-
10usability
-
10creativity
-
10content
-
2design
-
3usability
-
4creativity
-
10content
More by umar_khalid
-
DIY ARDUINO UNO BOARD
this is a regular arduino board which all u need to do is solder the components and use a (FT232RL) ...
-
ARDUINO IR CONTROLLED RELAY (AC/DC)
This circuit needs maximum 5v - 7v if powered directly through DC power supply only. If ur supplyi...
-
LIGHT AND MOTION SENSITIVE LAMP CIRCUIT
This is a circuit which activates a RELAY when the envoiroment is dark and when there is a movement ...
-
DIY ARDUINO PRO MINI 2.0 (upgraded version)
This is a DIY arduino PRO mini which is like a regular arduino pro minni but it has less components ...
-
DIY SMD ARDUINO UNO
This is a regular arduino board which contains extra features such as an extra VCC/GND rail and it u...
-
DIY SMD ARDUINO UNO R3
This is a regular arduino board which contains extra features such as an extra VCC/GND rail and it u...
-
LDR CONTROLLED RELAY MODULE SMD
This is a simple LDR dark sensor project which is designed to turn ON a relay (when there is light) ...
-
DIY ARDUINO UNO SHEILD SMD
This is a simple arduino sheild that can run on it's own as an arduino uno once it's powered...
-
DIY arduino UNO sheild
This is a simple arduino sheild that can run on it's own as an arduino uno once it's powered...
-
DIY 4017 CLAP SWITCH CIRCUIT.
THIS IS A SIMPLE CLAP SWITCH CCIRCUIT THAT USES A 4017ic DECODER. WHEN U CLAP ONCE, IT TURNS THE R...
-
DIY DIGITAL CLOCK
THIS IS A SIMPLE DIGITAL CLOCK THAT WORKS WITH A 9V BATTERY AND CAN BE SET JUST THREE BUTTONS.IF U L...
-
DIY ARDUINO UNO R3 SMD
THIS WORKS AS A REGULAR ARDUINO UNO WITH AN SMD ATMEGA 328P.U JUST NEED TO SOLDER THE COMPONENTS AND...
-
arduino mega password security system shield
this is a sheild for an arduino mega. this security system can be accesed using RFID and IR and a ke...
-
LED CHASER
this is a simple circuit using an ic 4017 and an ic 555 timer . u can adjust the frequency using the...
-
LED CHASER
this is a simple circuit using an ic 4017 and an ic 555 timer . u can adjust the frequency using the...
-
DIY arduino uno r3
DIY arduino uno circuit.its used just like a regular arduino uno all u gotta do is get the component...
-
ARDUINO UNO R3
AN ARDUINO UNO R3 DIY PROJECTU WILL NEED: ATmega 328P, 22PF ceramic capacitors(3), a few female pin ...
-
2 WAY INTERCOM CIRCUIT_20181119155207
THIS IS A 2 WAY INTERCOM CIRCUIT, IT WORKS LIKE A WALKIE TALKIE BUTWITH WIRES
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
