These are all of the custom-milled aluminum parts used to build my machine design. PBCWay sponsored these parts for my project and they turned out great...thanks PCBWay!

My file-name structure is: "Name" x "Quantity"

So for example: "X-axis belt clamp riser x 4.step" means to order 4 of them.

Note: Holes are not tapped in these files, all holes are drill-sized and ready for tapping.

Cutting area: 790 mm x 620 mm

Max speed: 60M / min

Total machine cost: $10.5k (minimum, cost will increase if ordering aluminum parts)

I am using a 1000W fiber laser source on my machine, and I have tested up to 8mm mild steel with great results (max cut thickness will be around 10mm with a 1kw laser).

See the full video build series at: https://www.youtube.com/@diyfiberlaser

Join me on Patreon, and get all of these supporting files and documentation at: https://www.patreon.com/DIYfiberlaser

Patreon members also have access to our private Discourse forum where I can help answer any questions you might have during the build.

- BOM

- Motor wiring diagram

- Laser source wiring diagram

- Gas control system diagram

- Product user manuals

- Full 3d model (STEP)

- 3D printed part files (STL & STEP)

- Cutting parameters

- Extrusion cut/drill list

- Fastener sizes list

- Laser cut part files (DXF)