Top Overlay
Top Solder Mask
Top Copper Layer
Mechanical Layer 1
Bottom Overlay
Bottom Solder Mask
Bottom Copper Layer
Bottom
Top
CandySpider - a breakout board for the FadeCandy
### DESCRIPTION
It's a versatile breakout board for the wonderful Scanlime FadeCandy by Micah ElizabethScott. It was first made for Life Under The Marquee.
### TECHNICAL DETAILS / COMPONENTS
The outputs of the FadeCandy are routed to three-part Molex connectors. There are lots of options for power and capacitor connections.
### LEARN / TOPIC / BUILD INSTRUCTIONS
The Fadecandy goes on the spider side.
CandySpider - a breakout board for the FadeCandy
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(1)
More by Johan Thornton
-
Programmable Mist Maker - XIAO / QT PY Extension
1770 2 1 -
RadioHAT - Raspberry Pi radio development platform
1528 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3771 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4511 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5311 2 2 -
