sb103_shorts_copper
Low thermal copper shorting bar, similar mechanically to ESI SB103. External two binding posts such as TBP-3 or TBP-1 would be required to use.
sb103_shorts_copper
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Illya xDevs.com
-
QuTRA_Rev1_2_final
Marta Musso, Massimo Ortolano and Michele Perotti developed and published open-source design [DOI: 1...
-
SOIC44 / SOIC24 to DIP44/24 adapter for programming Flash/ATF22V10 ICs
Tested with Xeltek programmer to read/write successfully following chips, removed from Fluke 5700A c...
-
[FPCB version] Precision thermometer + humidity sensor with digital I2C interface
Precision thermometer + humidity sensor with digital I2C interfaceThis is a 2-layer sensor FlexPCB w...
-
sb103_shorts_copper
Low thermal copper shorting bar, similar mechanically to ESI SB103. External two binding posts such ...
-
Fluke 5700/5720/5730/5790 repair extender board
This is extender PCB for debugging, repair and adjustment use in Fluke calibrators, such as 57xx/55x...
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
219 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1109 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
638 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3104 2 3 -
RadioHAT - Raspberry Pi radio development platform
2650 0 4 -
-
